Calpeda Pump( ปั๊มคาลปีด้า)

Calpeda Pump (ปั๊มคาลปีด้า)

Packaged Booster Pumps Set: Calpeda

 

 

Calpeda pump model : NMD20/110A

Presure Tank 100 Liter,Motor 0.75 Kw

Q = 1.42 L/min, H = 25-43 m

Discharge Pipe 2 inch

ราคา xxxxx บาท

 

 

Calpeda pump model : NMD20/110A

Presure Tank 200 Liter,Motor 0.75 Kw

Q = 1.42 L/min, H = 25-43 m

Discharge Pipe 2 inch

ราคา xxxxx บาท

 

 

Calpeda pump model : NMD20/140B

Presure Tank 100 Liter,Motor 1.1 Kw

Q = 1.48 L/min, H = 40-53 m

Discharge Pipe 2 inch

ราคา xxxxx บาท

 

 

Calpeda pump model : NMD20/140B

Presure Tank 200 Liter,Motor 1.1 Kw

Q = 1.48 L/min, H = 40-53 m

Discharge Pipe 2 inch

ราคา xxxxx บาท

 

 

 

โครงสร้าง
-ประกอบด้วยปั๊มน้ำหอยโข่งหลำยใบพัด "Calpeda" Model:NM,MXH จำนวน2 ตัว
-เสื้อปั๊ม(Casing)ทำจากเหล็กหล่อและสแตนเลส,ใบพัด(Impeller)ทำจากทองเหลืองและสแตนเลส
-ถังแรงดัน(Diaphragm Tank)จำนวน 1 ใบ
-ตู้ควบคุม(Control) จำนวน 1 ใบ
-ท่อร่วม(Manifold)ด้านจ่าย(Discharge)ติดตั้งพร้อมใช้งานการทำงาน
-แบ่งออกเป็น 2 ระบบ คือ ระบบ Manual และ ระบบ Automatic
• "Manual" อาศัยการทำงานผ่านมือกด สวิทซ์สตาร์ทและสต๊อปที่หน้าตู้ควบคุม
• "Automatic" การทำงานอัตโนมัติ ด้วยสวิทซ์แรงดัน(Pressure switch)
-มีระบบเสริมแรงดันและเพิ่มปริมาณน้ำด้วยปั๊มที่สอง,มีระบบสลับการทำงานของปั๊มแต่ละตัว
-การป้องกันน้ำขาด (Dry Run Protection)ด้วยชุดตรวจจับอิเลคโทรด(Electrode)
-ระบบป้องกันมอเตอรืเสียหาย(Overload)และฟิวส์ป้องกันการลัดวงจร

 

 

NM, NMD
Construction: Close-coupled, centrifugal pumps; electric motor with extended shaftdirectly connected to the pump.
NM: single-impeller.
NMD: with two back-to-back impellers (with axial thrust balancing).

Applications:
- For clean liquids without abrasives, which are non-aggressive for the pumpmaterials (solids content up to 0.2%).
- For water supply.
- For heating, air-conditioning, cooling and circulation plants.
- For civil and industrial applications.
- For fire fighting applications.
- For irrigation.

 


 

 

N, N4
Construction: Single-stage end-suction centrifugal pumps, with bearing bracket.Theelectropumps N, B-N, N4, B-N4 series comply with the European Regulation no.547/2012 in force starting from 01.01.2013.
Nominal duty points and main dimensions in accordance with EN 733.
Back Pull-Out construction, for simple and quick dismantling and reassembly.
N, N4: version with pump casing and lanter bracket in cast iron.
B-N, B-N4: version with pump casing and lanter bracket in bronze (the pumps aresupplied fully painted).Rated speed of rotation (50 Hz): N = 2900 rpm. ; N4 = 1450 rpm.
Applications:
- For clean liquids, without abrasives, which are non-aggressive for the pumpmaterials (contents of solids up to 0.2%).
- For water supply.
- For heating, air conditioning, cooling and circulation plants.
- For civil and industrial applications and for agriculture.
- For fire fighting applications.

 

NR
Construction: Close-coupled, single-impeller, centrifugal pumps; electric motor withextended shaft directly connected to the pump.
The electropumps N, B-N, N4, B-N4 series comply with the European Regulation no.547/2012 in force starting from 01.01.2013.
Pump casing with suction and delivery connections with the same diameter and on thesame axis (in-line).


Applications:
- For clean liquids, without abrasives, which are non-aggressive for the pump materials(contents of solids up to 0.2%).
- For heating, conditioning, cooling and circulation plants.
- For civil and industrial applications.
- When low noise operation is required (n = 1450 rpm)

 

 

MSH
Construction: Horizontal multi-stage close coupled pumps in chrome-nickelstainless steel. Compact and robust construction, without protruding flange and withsingle- piece lantern bracket and base. Single-piece barrel casing, with front suctionport above pumps axis and radial delivery at top. Filling and draining plugs on themiddle of the pump, accessible from any side (like the terminal box). 

Applications:

- For water supply.
- For clean liquids, without abrasives, which are non
- stainless steel (with suitable seal materials, on request).
- Universal pump For civil and industrial applications, for garden use and irrigation.

 

 

 

 

NMP
Construction: Close-coupled self-priming centrifugal pumps with built-in strainer. Innerbasket with Ø 3 mm holes.
NMP: version with pump casing and lanter bracket in cast iron.
B-NMP: version with pump casing and lanter bracket in bronze (the pumps are suppliedfully painted).

Applications:
- For water circulation in swimming pool filtration systems.
- For clean or slightly dirty water with solids in suspension

MXV-B
Construction: Vertical multi-stage close coupled pumps with suction and deliveryconnections of the same diameter and arranged along the same axis (in-line).All parts
that come into contact with the liquid, including wet-end covers, are in chrome-nickelstainless steel with corrosion resistant bearing sleeves lubricated by the pumped liquid.

Applications:
- For water supply systems.
- For clean non-explosive liquids, without solid, filamentary or abrasive matter andnon-aggressive for stainless steel (with adaptation of sealing materials on request).
- A universal pump for civil and industrial use, for pressure-boosting systems, fireextinguishingsystems, high-pressure washing plants, irrigation, agricultural uses andsport installations.

 

 

C
Construction: Close-coupled centrifugal pumps with open impeller.Free-flow impeller (vortex or recessed impeller) for type C 16/1E.
C: version with pump casing and lanter bracket in cast iron.
B-C: version with pump casing and lanter bracket in bronze (the pumps are suppliedfully painted).

Applications:
- For moderately dirty liquids or emulsions.
- For industry and agriculture

 

GM10
Construction: Submersible drainage pump constructed with composite polymersdeveloped especially for this product These new rustproof materials are resistant to
corrosion, in deformable at maximum temperature differentials in the pump and motorand resistant to internal and external strain. Shaft of chrome steel AISI 430. Three lip
seals in NBR.Minimum dimension and high levels of performance, for use in many differentapplications, for flow rates up to 200 liters/min. With float switch for automaticstart/stop.

Applications:
- For clean or slightly dirty water.
- For draining flooded rooms or tanks.
- Extraction of water from ponds, flowing wateror pits for collection of rain water
- For irrigation purposes.
- For use outdoor, the power supply cable shall have a length not less than 10 m.